EN
24
PROG icon and Track number"01"start flashing in the display.
2. Press SEARCH/SKIP / button to select the desired track.
3. When the desired track is displayed, press the PROG button to register.
The PROG number changes to 02. Track number returns to 00 and flashes
together with PROG.
4. Repeat above steps 2 and 3 to program more tracks. Up to 20 tracks can
be programmed into the memory.
5. Press PLAY/PAUSE button to start the programmed play.
6. To erase the program, in STOP mode simply press the STOP button.
ANTI-SHOCK PROTECTION
This player incorporates an electronic anti-skip circuit to prevent interruption
of the sound output when the unit is subjected to shock, vibration or rolling
during disc playback. The anti-shock system will automatically activate when a
disc is playing, the ESP indicator will appear in the display and flashing.
Once anti-skip buffer is full, it will give you approximately 120 seconds of
protection against interruption of sound output. If the player is subjected to
shock or rolling for longer than the buffer memory, some interruption of sound
output will occur. This is normal and to be expected and the sound will resume
once the player has stabilized from the shock or rolling disturbance.
Note: The anti-skip function provides for continuous sound output
when the unit is subjected to shock or vibration. It will not
compensate for errors arising from the use of defective,
scratched or dirty discs.