Nicols IC4 LED Manuel D'utilisation page 24

Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select
always on) or
ENTER button to setup or exit menu mode without any change after one minute. Back to
the functions without any change press MENU button again.
Display Inverse
Press MENU button until
select (display normal) or
setup. Back to the functions without any change press MENU button.
Temperature Test
Press the MENU button up to when the
ENTER button and the display will show the temperature of the unit. To go back to the
functions press the MENU button again.
White Balance
Press the MENU button up to when the
button, and use DOWN and UP button to select
ENTER button to confirm and use DOWN and UP button to adjust the value between 125
and 255, once select press ENTER button to setup or automatically exit menu mode
without any change after one minute. To go back to the last function without any change
press the MENU button.
Fixture Hours
Press the MENU button up to when the
ENTER button and the display will show the number of working hours of the unit. To go
back to the functions press the MENU button.
Software version
Press the MENU button up to when the
ENTER button and the display will show the version of software of the unit. To go back to
the functions press the MENU button again.
(display off 20 seconds after exit menu) mode. Once select, press
is blinking on the display. Use DOWN and UP button to
is shown on the display. Pressing ENTER
(display inverse), press ENTER button to
is blinking on the display. Pressing
is shown on the display. Pressing ENTER
,
is blinking on the display. Pressing
is blinking on the display. Pressing
(display
or , press