Publicité
Les langues disponibles
Les langues disponibles
In the event of serious operating problem, stop using the unit immediately.
Never turn on and off the unit time after time.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
Do not open the unit as there are no user serviceable parts inside.
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
Disconnect the mains power if the fixture is not used for a long time.
Do use original packing materials once transport it again.
Do not look at the beam light directly in order to avoid visual problems
Please pay attention to the LED emissions that can cause eyes sensibility.
For power supply, do not connect in series much more than 7 units, use another
mains supply for next 7 units.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a weight of 10
times of the unit‟s weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
of the touch of people and has no one pass by or under it.
2. Technical Specifications
Voltage: 230V/50Hz
LED: 18 x 3W RGB(Tri-color)LED
Fuse: T 6.3A
Power consumption：71W
Dimension：405 x325 x93 mm
Weight：6.5 kg
Publicité
