Troy-Bilt 200 Serie Manuel De L'opérateur page 8

Controls & Features
Tine Clutch Control
Handlebar Height Adjustment
Back of Tiller
Depth
Stake
NOTE: This Operator's Manual covers several garden tiller
models. The tiller depicted may differ from yours.
Tine Clutch Control
The clutch control lever is located on the upper handle.
Squeezing the lever against the handle engages the tine drive.
Release the lever to stop the tines from turning.
Handlebar Height Adjustment
The handlebar height is adjustable to three different settings. In
general, adjust the handlebars so they are at waist level when the
tines are 3-4" in the ground.
Clutch Cable
Depth Stake
Rear
Wheels
Rear Wheels
Figure 4-1
Depth Stake
The depth stake acts as a brake for the tiller and controls the
depth and speed at which the machine will operate.
Rear Wheels with Depth Stake
The rear wheels can be raised and lowered for transport and
storage. Refer to the Maintenance & Adjustments Section for
instructions on depth stake adjustment and the Assembly & Set-
Up Section for instructions on wheel adjustment.
Engine Controls
Refer to the engine manual for information and function of the
engine controls.
4
Tines
8