Télécharger Imprimer la page

Kenmore ULTRA WASH 665.17745 Serie Guide D'utilisation Et D'entretien page 9

Publicité

Les langues disponibles

Les langues disponibles

5. Turn the hot water on slowly until it is all the way on.
6. Plug into a grounded 3 prong outlet.
Disconnecting
the Dishwasher
1. Turn off the hot water. (This can be done after the last rinse.)
2. Press the red button on the connector to release the water
pressure.
3. Lift slightly on the hose connector while pulling down the
locking collar. Pull down on the connector.
4. Empty any remaining water from the connector by turning the
connector upside-down.
5. Unplug the power supply cord and return it to the storage
compartment.
6. Return the hoses to the storage compartment.
-qp
B
C
D
A. Faucet adapter
B. Locking collar
C. Red button
D. Hose connector
DISHWASHER LOADING
Remove leftover food, bones, toothpicks
and other hard
items from the dishes. To conserve water and energy and
save time, it is not necessary to rinse dishes before putting
them into the dishwasher.
NOTE: Prerinsing dishes soiled with tomato-based
products
is recommended
to avoid staining the dishware.
The wash module removes food particles from the water. The
module contains a triple action filtration system that
intermittently
filters soil from the water.
NOTE: If hard items such as fruit seeds, nuts, and eggshells
enter the wash module, you might hear grinding, crunching,
or buzzing sounds. These sounds are normal when hard
items enter the module. To avoid damage to the dishwasher,
do not let metallic items (such as pot handle screws) get into
the wash module.
For best drying, water must be able to drain from all surfaces.
It is important for the water spray to reach all soiled surfaces.
Load dishes so they are not stacked or overlapping
if
possible.
Use special care when loading heavy pots and pans. Heavy
items can damage the interior of the door if they are dropped
or bumped.
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not interfere with the spray arm rotation.
Conserve water and energy and save time over hand rinsing
by running a rinse cycle to keep dishes moist if you do not
plan to wash them soon. Foods such as eggs, rice, pasta,
spinach, and cooked cereals may be hard to remove if they
are left to dry over a period of time.
Place items so open ends face down for best cleaning and
draining.
Quiet operating tips
To avoid thumping/clattering
noises during operation:
Make sure lightweight load items are secured in the racks.
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not touch interior walls or interfere with the rotation of
the spray arm(s).
Load dishes so they do not touch one another.
NOTE: For built-in models, keep sink drain plugs closed during
dishwasher operation to avoid noise transfer through drains.
The top rack is designed for cups, glasses, and smaller items.
Many items, up to 9" (22 cm), fit in the top rack. (See
recommended
loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
12 place setting
9

Publicité

loading