IFM Electronic AS-interface AC1355 Notice De Montage page 15

Menu navigation
By pressing the left button in the start display (AS-i error diagnostics)
the main menu is opened. The two buttons in the middle allow scrol-
ling through the menu.
O Quick Setup
O PLC Setup
O Slave Lists
O Address Slave (Programming of the addresses of the connected
(summary of the menu items for a basic configura-
tion)
∇ 'Teach in' of the current AS-i configuration
(Project all)
∇ Settings of the fieldbus interface (option)
(settings of the optional PLC)
∇ Switch the gateway mode on or off (operation
without PLC)
∇ Start and stop the PLC in the controller
∇ plc project name, version, date and author
(Checking of the addresses of the connected AS-i
slaves)
∇ Indication of the list of detected slaves (LDS)
∇ Indication of the list of projected slaves (LPS)
∇ Indication of the list of activated slaves (LAS)
∇ Indication of the list of periphery faults in AS-i
slaves (LPF)
AS-i slaves)
∇ Readdressing of an AS-i slave connected to the
controller
e
∇ Automatic addressing of new AS-i slaves to the
next free address (easy start-up)
(if used)
e
15