Publicité
In the main interface, press "
time the wire controller will buzz for 1s and the outlet water temperature will flicker display.
If there is no operation for 10s or press "
4.7 One-Click Mute
In the main interface, press "
"ON", it means the one-click mute has been set. If the digital display is "OFF", it means cancellation of
one-click mute.
If there is no operation for 5 seconds system will save the current mode and back to the main interface.
" 2 seconds can check the outlet water temperature, and at the same
" system will back to the main interface.
" for 5 seconds can change the current mode. If the digital display is
13
Publicité
