Télécharger Imprimer la page

TechniSat TECHNILINE ISI Manuel D'instructions page 30

Publicité

Les langues disponibles

Les langues disponibles

6.5 Receiving encrypted channels
>
Insert a CI-/CI+- module in the slot, with the upper side pointing to the rear and
insert the smartcard with the gold chip to the back and facing in the direction of
insertion into the card slot in the CI/CI+ module.
When so doing, see also the information in the section on the encrypted channels
in the user manual.
6.6 Volume control
After switching on the television, sound is played back according to the power-on
volume configured using the Sound settings menu (Section 10.2.1 in the user manual).
>
To adjust the volume of your TV, press Volume + to increase the volume or
Volume - to decrease it.
6.6.1 Switching to mute
>
Press the Sound on/off key to switch the sound off and press it again to switch
the sound back on.
6.6.2 Headphone volume
>
While the sound is muted it is possible to use the Volume + and Volume - rocker
keys to adjust the volume for the headphones.
6.7 Selecting a different language / sound options
For some channels you have the option of selecting a different sound option (Dolby
Digital, Stereo or Audio Channel 1 or Audio Channel 2) or another language.
>
Using the Options selection feature, you can select the sound option you want
via the Sound option.
See also the information in the Sound options section of the user manual.
6.8 Sound mode
You can use the sound mode selection to switch between the preset sound modes:
standard, film, music and speech.
>
You can select the sound you want using Option selection under Sound mode.
The sound modes can be changes in the menu to your preferences.
6.9 Display mode
You can use the display mode selection option to switch between the preset display
modes while using the device: economical (home use), natural (default), intensive
(for presentations), film (cinema) and PC (graphics).
>
You can select the display mode you want using option selection under Display
mode.
You can set the display modes to suit your preferences as described in point 10.1
in the instruction manual.
30

Publicité

loading