TechniSat TECHNILINE ISI Manuel D'instructions page 21

Selecting reception signals
> Use the up/down arrow keys to select the reception signal you want to switch on
or off.
DVB-S
DVB-C
DVB-T
Analogue CT
Network (IPTV)
> Press the OK button to open the selection window; highlight the setting you want
with the up/down arrow keys and close the window by pressing the OK button
again.
> To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK button.
IPTV-Provider
If you have activated the IPTV option when selecting reception signals, you can
configure a provider in this step.
> If you use the service of an IPTV provider, select the desired setting using the
arrow keys and the OK button.
> Select Accept and press the OK button to accept the settings.
for digital satellite channels
for digital cable channels
for digital terrestrial channels
for analogue terrestrial and cable channels
for digital IP-TV channels.
21