Publicité
Les langues disponibles
Les langues disponibles
Picture mode
>
Use the up/down arrow buttons to select the picture mode you want.
The values preset by the selected picture mode can be adjusted as desired after
the AutoInstall, as described from point 10.1.3 onwards in the instruction manual.
>
Confirm by pressing OK button.
When selecting either the intense or natural picture mode, observe the note that
appears as well as points 3.3.3, 07.10 and 10.1.2 in the instruction manual, and
confirm by pressing the OK button.
Setup location
>
Use the up/down arrow keys to select whether your device is to be installed free-
standing (e.g. on a table or cabinet) or on a wall (wall-mounted).
This selection adapts the speaker settings to your surroundings.
20
Publicité
