TechniSat TECHNILINE ISI Manuel D'instructions page 29

6.3 AV source
> Press the AV button to open the AV sources selection window so as to select a
device connected to the HDMI inputs (HDMI 1 / 2) or to the AV socket (via AV
adapter) (AV) on the TV.
> Select the source you want using the up/down arrow keys and confirm by
pressing the OK button to switch over to the selected input.
When doing this also observe points 7.2.1 - 7.2.3, 7.2.6, 10.9 as well as section 12
of the instruction manual.
An HDMI input can also be allocated to the HDMI button (point 10.5.7.2 in the
instruction manual) so that it is called up by pressing this button.
6.4 Channel/source information
6.4.1 Info box
Every time you change channels, an info box appears on the screen for a certain period,
as defined according to point 10.5.1.3 in your instruction manual.
The channel slot and name as well as the source of the channel selected, the channel
list in which the channel is located and the title of the current program with the start/
end time and the progress bar, as well as further channel information (e.g. for teletext,.
for 4:3 broadcasts,
broadcasts ) are shown in this Infobox
The current time is shown in the upper right-hand corner of the screen.
6.4.2 Displaying time and program information
This function allows you to see channel information about the channel being watched.
> Pressing the Info button displays the information described in section 6.4.1 again
for the period set under Menu > Settings > Special functions > OSD > Info banner
display time.
6.4.3 Additional program information
Provided this is being transmitted, you can get additional program information for the
current program.
> Pressing the Info button twice enlarges the information window and displays
additional information about the program currently selected.
> Extended information text can be moved line by line using the up/down arrow
keys or scrolled through page by page using the page up/down keys.
> If available, pressing the Info key again will bring up the next program.
> Press the Info button once more to hide the display again.
for subtitles, for encrypted channels, or for Dolby Digital
29