TechniSat TECHNILINE ISI Manuel D'instructions page 23

Network configuration
In this step the TV automatically checks the network configuration.
> If you wish to change the network settings, press the Option button, select LAN or
WLAN with the up/down arrow keys and press the OK button.
> Then configure the network settings as described in points 10.4 and 10.4.2 of the
instruction manual and then press the green function key to accept the settings.
> Once the network check has been successfully completed, press the OK button to
move on to the next step.
Channel search / ISIPRO
> To download the current channel list, use the up/down arrow keys to highlight the
ISIPRO - service list update line and start the process by pressing the OK button.
> If you want to run a channel search via satellite as well, or if the DVB-S reception
signal has not been configured, use the up/down arrow keys to highlight the
All channels or All unencrypted channels field, then start the channel search
process by pressing the OK button.
After the channel list update, an automatic channel search on all other configured
reception sources is then carried out via "All Channels".
nur DVB-S
23