TechniSat TECHNILINE ISI Manuel D'instructions page 14

4.4.1 Arrow selection method
> If shown on the left and on the right, next to the set value, you can alter this using
the left/right arrow keys.
4.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the
selection list.
> press the OK button to open the selection list.
> Highlight the setting you want using the up/down arrow keys.
Use the up/down arrow keys to move the highlight from line to line and to move
upwards and downwards page by page using the page up/down buttons.
> Confirm by pressing the OK button. The selection list closes again and the selected
setting is shown in the menu.
14