ABB AG-102-500 Manuel D'instructions page 43

All manuals and user guides at all-guides.com
Instructions ref. to installation/Fig. 5
Please observe the following points prior to and during installation:
- Make sure that neither persons nor things are standing in the travelling
range of the shutters, etc.
- The switching of three-phase loads (e. g., motors) is forbidden.
- In dry locations, the device can be installed on walls as well as on ceilings. In
damp locations, only a vertical installation on walls is permitted (water drain on
the bottom).
- If the device is to be installed on an intermediate ceiling or in a cabinet,
sufficient cooling has to be ensured.
Fig. 5: Location and distance of the bores/drain openings
a
119
Ø 4,0
GB