Abus eyseo ECOLINE Serie Manuel D'installation page 9

All manuals and user guides at all-guides.com
5. Installation instructions
The waterproof Eyseo colour cameras are particularly well suited for day and night
surveillance. In addition, the Eyseo colour cameras are equipped with automatic
switching for black/white operation when illumination falls below 2 lux.
First-class video pictures are largely dependent on the illumination used. When using
artificial light, make sure you use lights with a colour spectrum as near as possible to
daylight, since colour distortion can otherwise occur with colour cameras.
The reason for poor picture quality is often bad-quality cabling. Make sure the
connections are properly crimped, avoid passive video signal distributors, and always
choose the shortest possible cable route between the camera and video processing
devices.
If necessary, the sunroof of the waterproof camera can be removed.
6. Description of the camera
(1) Video output connector (Video OUT)
BNC output. This connector is for connecting the camera video signal to the VIDEO
IN connector of, for example, the monitor (composite signal: 1Vp-p).
(2) Power input
12V DC voltage. Approved for DC voltage are class 2 power supply units only.
Ensure the polarity is correct.
4