Clearing Memory; Setting Automatic Rejecting; Setting Automatic Answering; Switching The Ring Tone - Pioneer DEH-P5100UB Mode D'emploi

Available accessories
3 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
# Up to 24 digits can be entered.
4 When you finish entering the number,
press MULTI-CONTROL.
Call confirmation appears.
5 Press MULTI-CONTROL again to make a
call.
6 To end the call, push MULTI-CONTROL
down.

Clearing memory

1 Use MULTI-CONTROL to select
Clear memory in the function menu.
Refer to Function and operation on page 41.
2 Push MULTI-CONTROL up or down to
select an item.
Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
order:
Phone book (phone book)—Missed calls
(missed call history)—Dialed calls (dialled
call history)—Received calls (received call his-
tory)—Dial preset (preset phone numbers)—
All clear (delete all memory)
# If you want to clear all the Phone Book,
dialled/received/missed call history list and pre-
set phone number, select All clear.
# If guest phone is connected to this unit via
Bluetooth wireless technology, Phone book can-
not be selected.
3 Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
Clear memory YES is displayed. Clearing
memory is now on standby.
# If you do not want to clear the memory that
you have selected, push MULTI-CONTROL left.
The display reverts to normal.
4 Press MULTI-CONTROL to clear the
memory.
Cleared is displayed and data on the selected
item is cleared from this unit's memory.

Setting automatic rejecting

1 Use MULTI-CONTROL to select
Refuse calls in the function menu.
Refer to Function and operation on page 41.
2 Press MULTI-CONTROL to turn auto-
matic call rejection on.
# To turn automatic call rejection off, press
MULTI-CONTROL again.

Setting automatic answering

1 Use MULTI-CONTROL to select
Auto answer in the function menu.
Refer to Function and operation on page 41.
2 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press MULTI-CONTROL again.

Switching the ring tone

1 Use MULTI-CONTROL to select
Ring tone in the function menu.
Refer to Function and operation on page 41.
2 Press MULTI-CONTROL to turn the ring
tone on.
# To turn the ring tone off, press
MULTI-CONTROL again.

Echo canceling and noise reduction

1 Use MULTI-CONTROL to select
Echo cancel in the function menu.
Refer to Function and operation on page 41.
Section
06
47
En