CONTROLS AND DISPLAY
CONTROLS
Used to set the time (hours and minutes)
hr, min
Used to select the coffee strength. For Grind & Brew mode the options are:
bb
bb. For pre-ground coffee mode the options are OFF or ON.
Number of cups that are being brewed (Grind & Brew mode only). Selects the amount of coffee which will be ground based on the
g
amount of water in the reservoir. Options: 2, 4, 6, 8 and 10. Default values is 8.
Y
Used to set up the timer.
s
Mode select. This button selects Grind & Brew mode (display will show
Starts the brewing process.
+
c
Initiates self clean mode.
DISPLAY ICONS
Shows the currently selected coffee strength. For Grind & Brew mode the display shows:
pre-ground coffee mode if the strength mode is set to OFF no
b, bb, bbb
will show
.
b
Shows the currently selected number of cups being brewed (Grind & Brew mode only).
2, 4, 6, 8 or 10
g
Grind & Brew mode selected.
s
Pre-ground coffee mode selected.
c
The machine needs cleaning. Use the self clean function.
CLE
OPERATING MODES
Your coffee maker has two operating modes.
GRIND & BREW MODE
This mode uses fresh coffee beans to make the coffee.
PRE-GROUND COFFEE MODE
This mode uses pre-ground coffee added directly to the filter to make the coffee.
USING GRIND & BREW MODE
The quality and flavour of your coffee is determined by the type of beans, the grind size and the brewing time. We recommend experimenting with the
grind size and coffee strength button until you find the settings that work best for you.
1.
To select Grind & Brew mode, press the
2.
Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.
3.
Open the filter compartment and place a #4 paper filter into the filter holder. Close the compartment.
4.
Open the coffee bean hopper lid and fill it with fresh coffee beans. Don't overfill the hopper so that you can't refit the lid. The lid seal will help to
keep the coffee beans fresh between uses.
5.
Turn the grind control to the required setting (l fine,
g
6.
Press the
button to select the number of cups you are brewing. The setting you choose will depend on how much water you have added to the
reservoir. For example, if you have filled the reservoir to the 6 cups mark, set the number of cups to 6 as well. The default setting is 8.
7.
Select the desired coffee strength using the
8.
Press the + button to start brewing. After a short time, the grinder will operate and the light around the button will flash while the coffee is brewing.
9.
Once the coffee is brewed, the light will stop flashing.
USING PRE-GROUND COFFEE MODE
1.
To select pre-ground coffee mode, press the
2.
Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.
3.
Open the filter compartment and place a #4 paper filter into the filter holder.
4.
For each large cup, add 6g of ground filter coffee to the filter. The amount of ground coffee you add will depend on how much water you have
added to the reservoir. For example, if you have filled the reservoir to the 6 cups mark, add 6 measures of ground coffee.
5.
Close the filter compartment.
6.
Select the desired coffee strength using the
slowing down the rate that water passes through the pre-ground coffee.
7.
Press the + button to start brewing. After a short time, the light around the button will flash while the coffee is brewing.
8.
Once the coffee is brewed, the light will stop flashing.
All manuals and user guides at all-guides.com
s
g
button until the
icon shows on the display.
l
medium and l coarse).
button. The default setting is
bb
s
s
button until the
icon shows on the display.
button. The default setting is OFF. Setting coffee strength to ON will give a stronger brew by
bb
5
normal
medium
b
bb
g
), or pre-ground coffee mode (display will show
normal
b
icon will be shown. If the strength mode is set to ON the display
b
.
bb
strong. Default value is
bbb
s
).
medium
strong. For
bb
bbb
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE