Setting The Clock; Setting The Daily Timer 1 - Teac T-R650 Manuel Du Propriétaire

Setting the Clock

< The unit uses the 24-hour clock.
1 Press the TIME ADJ button.
C-time
CH12
The hour value flashes.
2 Turn the TUNING/SELECT knob to set the current hour, and
press the ENTER button.
C-time
CH12
The hour is set, and the minute value flashes.
3 Turn the TUNING/SELECT knob to set the current minute,
and press the ENTER button.
The clock starts from 00 second.
16
00:00:00
108.00MHz
10:00:00
108.00MHz

Setting the Daily Timer 1

This function is available only when REMOTE CONTROL jacks of
the T-R650 and the A-R650 are connected with a remote control
connection cord.
< Adjust the clock before setting the timer.
1 Press the DAILY button.
On time 00:00:00
CH12
"On time" appears on the display, and the hour value flashes.
< When you use the remote control, press the TIME ADJ
button for 2 or more seconds.
2 Turn the TUNING/SELECT knob to set the start time (hour),
and press the ENTER button.
On time 07:00:00
CH12
The hour is set, and the minute value flashes.
108.00MHz
108.00MHz