Rds 1 - Teac T-R650 Manuel Du Propriétaire

How to select preset stations
Select AM or FM by pressing the BAND button repeatedly.
1
2 Select a preset channel by the numeric buttons.
The selected preset channel is tuned in.
For instance, to select preset number 25, first press the TUNER
button, and then press "2" and "5".
To select numbers less than 10, press "0" and then the number. As
an example, to select number 5, press "0" and "5". (Optionally, you
may press just the number "5" and then wait a few seconds.)

RDS 1

The Radio Data System (RDS) is a broadcasting service which allows
stations to send additional information along with the regular radio
programme signal.
RDS works on the FM waveband in Europe only.
Tune in an FM station (see page 8).
1
2 Press the RDS MODE button.
Each time the RDS MODE button is pressed, the RDS mode is
changed as follows:
PS (PROGRAM SERVICE)
When you select PROGRAM SERVICE, "PROGRAM SERVICE" will
blink for about 3 seconds and then the programme service
name or a station's name will be displayed. If there is no
programme service data, the frequency will be displayed.
PTY (PROGRAM TYPE)
When you select PROGRAM TYPE, "PROGRAM TYPE" will blink
for about 3 seconds and then the programme type will be
displayed.
RT (RADIO TEXT)
When you select RADIO TEXT, "RADIO TEXT" will blink for about
3 seconds and then the news of stations composed of up to 64
symbols will be displayed.
If there is no radio text data, RDS mode will be automatically
switched to PROGRAM SERVICE mode.
TA (TRAFFIC ANNOUNCE)
When you select TRAFFIC ANNOUNCE, "TRAFFIC ANNOUNCE"
will blink for 3 seconds and then the unit searches for a traffic
announcement.
< When a traffic programme is found, the TRAFFIC ANNOUNCE
mode is switched to PROGRAM SERVICE mode.
If the station currently selected is transmitting a traffic program
signal, the RDS mode will be switched to PROGRAM SERVICE
mode without searching for a traffic program.
CT (CLOCK TIME)
Displays the information about times provided from the station.
When you select CLOCK TIME, "CLOCK TIME" will blink for about
3 seconds and then the clock time will be displayed.
13