Télécharger Imprimer la page

Mafell LO 55 Traduction De La Notice D'emploi Originale page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
2.6 Scope of supply
Router LO 55 complete with:
1 parallel guide fence
1 fine adjustment
1 chip deflector
1 template guide Ø 20 mm, Ø 30 mm, Ø 40 mm
1 template guide adapter
1 extraction adapter
1 extraction adapter for guide rail
1 adapter sleeve ¼" (only for item No. 91A921)
1 carrying case
1 operating manual
1 folder "Safety instructions"
2.7 Safety devices
Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
Before operating the machine,
check the safety devices for
function and possible damage. Do
not use the machine with missing
or ineffective safety devices.
The machine is equipped with the following safety
devices:
- large base plate
- Handles
- Index mechanisms
- Extraction adapter
2.8 Use according to intended purpose
The MAFELL router LO 55 is exclusively intended for
milling of solid wood and panel materials such as chip
board, coreboard, synthetic board, MDF board and
Alucobond board using HSS or TCT milling cutters.
Mineral materials (plasterboard or other dry
construction materials) can also be milled. During
milling, pay attention to best possible extraction and
cleaning of the machine.
Any other use than described above is not permissible.
The manufacturer cannot be held liable for any
damage arising from such other use.
So as to use the machine as intended, comply with the
operating, maintenance and repair instructions
specified by Mafell.
2.9 Residual risks
- Touching the running milling cutter or the clamping
sleeve.
- Breakage of the milling cutter and risk of the milling
cutter or pieces of the milling cutter being hurled
away.
- Backlash of the machine or the workpiece.
- Backlash of the machine if the milling cutter gets
stuck in the workpiece.
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of harmful wood dusts during longer
operation without extraction.
-25-
Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use that can lead
to health consequences will always
remain.

Publicité

loading