Dolmar AS1925 Manuel D'instructions page 7

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Overall length (without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar
length
Applicable saw chain type
(refer to the table below)
Sprocket
90PX
91PX
Sprocket
80TXL
Sprocket
25AP
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
*1
*2
with 90PX
with 91PX
with 80TXL
with 25AP
Number of teeth
Pitch
Number of teeth
Pitch
Number of teeth
Pitch
AS1925
250 mm
250 mm
250 mm
-
90PX
91PX
80TXL
0 - 24.8 m/s
(0 - 1,490 m/min)
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC / LG-184 / LG-184 X2
7 ENGLISH
AS1925C
256 mm
D.C. 18 V
2.0 kg
2.8 - 3.3 kg
250 mm
-
-
-
250 mm
25AP
6
3/8"
7
0.325"
9
1/4"
0 - 22.5 m/s
(0 - 1,350 m/min)
3
140 cm