Publicité
Les langues disponibles
Les langues disponibles
CONTROL VALVE OVERVIEW
WARNING: To prevent equipment damage and possible
injury, always switch off sand filter before changing the Control
Valve function. Changing valve positions while the pump is
running can damage the Control Valve, which may cause
personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to desired
function.
Filter: This function is used to filter pool water and
should be positioned here 99% of the time. Water is
pumped through the sand filter, where it is cleaned
and returned to the pool.
A
Backwash: This function is used to clean the
sand bed; water is pumped down through the
Collector Hub, upwards through the sand bed,
and deposited out of Port D.
A
C
B
C
D
B
A
Closed: This function stops water flowing
between the sand filter and the pool.
A
Rinse: This function for initial startup, cleaning,
and sand bed leveling after Backwash; water is
pumped downwards through the sand bed, up
through the Collector Hub and deposited out of
the valve Port D.
A
10
C
D
C
B
C
D
B
c
Publicité
