Uline H-10336 Instructions De Montage page 4

Cable Tie x 2
Figure 7
PAGE 4 OF 12
PARTS FOR WALL ANCHOR KIT
Wall Bracket x 2
ST3.5 x 38 mm Screw x 4
WALL ANCHOR KIT ASSEMBLY
1-800-295-5510
uline.com
Metal Bracket x 2
M6 x 12 mm Bolt x 2
1. Mark holes on wall where plasitc anchors will be
located. Drill holes using 5/16" drill bit.
2. Mount wall bracket to wall with two ST3.5 x 38 mm
screws and plastic anchors. (See Figure 7)
3. Secure metal bracket to top of mail sorter using one
M6 nut and one M6 x 12 mm bolt. (See Figure 7)
NOTE: End with slotted hole should be attached
to the mail sorter.
4. Tighten cable tie to prevent tipping. Repeat for other
side of mail sorter.
Plastic Anchor x 4
M6 Nut x 2
0123 IH-10336