Publicité
Les langues disponibles
Les langues disponibles
Mail Sorter
1.
Stack one mail sorter on top of base. Fasten mail
sorter to base using six M6 x 10 mm bolts and six
M6 nuts using a Phillips screwdriver and 10 mm
wrench. Holes are located in the front and rear of
the sorter on the far left, center and right columns.
(See Figure 6)
NOTE: Mail sorter shelves can be removed to
provide more space when tightening bolts and
nuts.
2. Stack second mail sorter on top of attached
mail sorter. Fasten mail sorter to attached mail
sorter using six M6 x 10 mm bolts and six M6 nuts
using a Phillips screwdriver and 10 mm wrench. If
assembling a 75-slot or 100-slot unit, repeat for
remaining mail sorters. (See Figure 6)
Figure 6
CAUTION! Do not stack more than four mail
sorters.
PAGE 3 OF 12
PARTS FOR MAIL SORTER
M6 x 10 mm
Bolt
H-10336
H-10337
H-10338
M6 Nut
MAIL SORTER ASSEMBLY
COMPLETED ASSEMBLY
H-10336
NUMBER OF
M6 x 10 mm BOLT
MAIL SORTERS
2
12
3
18
4
24
H-10337
H-10338
M6 NUT
12
18
24
0123 IH-10336
Publicité
