Télécharger Imprimer la page

Nederman MFS Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
3 Description
3.1 Intended use
The filter unit MFS is designed for filtration of aerosols (fog, mist, dust and fumes) as well as gases/vapours
from solvents.
The MFS filter is not suitable for use in collecting combustible dust. The carbon/gas filter option can be used for
controlling odours and vapours from non-toxic smelling solvents in moderate concentrations.
Please contact your Nederman expert for consultation on how to use this product in your application.
All manuals and user guides at all-guides.com
MFS
2.2 General safety instructions
Notes contain other information that is import-
ant for personnel.
WARNING! Work safety regulations. Risk
of personal injury, fire or explosion.
• Do not use the MFS filter for flammable dust
or explosive gases.
• MFS with Carbon/Gas filter must not be used
for dust or welding fumes.
• MFS with Carbon/Gas filter must not be used
for extracting odourless substances.
WARNING! Risk of personal injury
Various health and safety organizations have
advised about the risks of disease transmis-
sion, including COVID-19, through aerosol-gen-
erating procedures. The contents of this pub-
lication reflect Nederman's best efforts to in-
terpret available guidance and provide recom-
mendations regarding the use of Nederman
products to mitigate the risk of disease trans-
mission inherent with aerosol-generating pro-
cedures.
These recommendations do not and are not in-
tended to, constitute legal or medical advice.
Our solution is intended to be part of an over-
all safety strategy, which is ultimately the re-
sponsibility of the end-user, as no one system
can completely eliminate the risk of disease
transmission. We encourage customers to con-
sult appropriate counsel and advisors and make
an informed decision in choosing to use Neder-
man's solution to reduce aerosol concentra-
tion.
Nederman is available to assist customers in
better understanding how to properly install,
operate, and maintain the Nederman solution
in order to leverage its effectiveness for your
business purposes.
EN
7

Publicité

loading