Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Onkyo HT-R990 Manuel D'instructions

Advanced Operations

Advanced Setup

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is
connected to other video outputs, use the AV
receiver's display when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.

On-screen Setup Menus

MENU
1. Input/Output Assign
a
b 2. Speaker Setup
3. Audio Adjust
c
d 4. Source Setup
5. Listening Mode Preset
e
f 6. Miscellaneous
g 7. Hardware Setup
8. Remote Controller Setup
h
i 9. Lock Setup
a Input/Output Assign
(➔ page 42)
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
b Speaker Setup
(➔ page 43)
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
c Audio Adjust
(➔ page 47)
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
5. LFE Level
d Source Setup
page 48)
(➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
6. Audio Selector
e Listening Mode Preset
(➔ page 53)
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. AUX
f Miscellaneous
(➔ page 53)
6. Miscellaneous
1. Volume Setup
2. OSD Setup
g Hardware Setup
(➔ page 54)
7. Hardware Setup
1. Remote ID
2. Tuner
3. HDMI
4. Auto Standby
5. Network
6. Firmware Update
h Remote Controller
Setup (➔ page 64)
8. Remote Controller Setup
1. Remote Mode Setup
i Lock Setup
page 57)
(➔
9. Lock Setup
Setup

Common Procedures in Setup Menu

RECEIVER
ENTER
q/w/e/r
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
1 Press RECEIVER followed by SETUP.
Tip
• If the main menu doesn't appear, make sure the appropriate
external input is selected on your TV.
2
Use q/w to select a menu, and then press ENTER.
3
Use q/w to select a target, and then press ENTER.
4
Use q/w to select an option, and use e/r to change
the setting.
Press SETUP to close the menu.
Press RETURN to return to the previous menu.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the arrow buttons, and ENTER.
• During Audyssey 2EQ ® Room Correction and Speaker Setup,
messages and alike that are displayed on the TV screen will
appear on the display.
Explanatory Notes
a
Main Menu
■
b Subwoofer
c
Yes
No
a Menu selection
b Setting target
c Setting options (default setting underlined)
Remote indicator
RETURN
Speaker Configuration
En
41