Publicité
Les langues disponibles
Les langues disponibles
The numbering in the illustrations reflects the order of the steps
shown in the illustration and may deviate from the numbering of the
steps/operations described in the text.
Item reference numbers are used in the overview illustration and
refer to the numbers used in the product overview section.
1.3 Product information
Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product and its ancillary equipment may present hazards when used incor-
rectly by untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification
plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to enquire about the product.
Product information
Cordless lamp
Generation
Serial no.
We reserve the right to make changes. Errors excepted.
2 Safety
2.1 Safety instructions
NOTE In addition to the information relevant to safety given in each of the
sections of these operating instructions, the following points must be strictly
observed at all times.
2.1.1 Careful handling and use
▶ Use the product only when it is in technically faultless condition.
▶ Never tamper with or modify the product in any way.
▶ Keep the product out of reach of children.
▶ Do not use the product where there is a risk of fire or explosion.
▶ Replace the complete cordless lamp when the light source has reached
the end of its life. The light source in this cordless lamp is not replaceable.
2.1.2 Use and care of battery-powered appliances
▶ Observe the special guidelines applicable to the transport, storage and
use of Li-ion batteries.
▶ Check that the appliance is switched off before inserting the battery.
2
SFL 14-A | SFL 18-A |
SFL 36-A
01
Publicité
