Hilti SFL 18-A Mode D'emploi page 5

1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a is a
prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in this documentation and
on the product.
• Always keep the operating instructions with the product and make sure
that the operating instructions are with the product when it is given to
other persons.
1.2 Explanation of signs used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the
product. The following signal words are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to seri-
ous personal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to
serious personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that
could lead to minor personal injury or damage to the equipment or
other property.
1.2.2 Symbols
The following symbols are used in the documentation:
Read the operating instructions before use
General warning
Instructions for use and other useful information
1.2.3 Symbols on the product
The following symbols are used on the product:
Do not look directly into the light source.
1.2.4 Drawings in the illustrations
The illustrations in these operating instructions are intended to promote a
better understanding and may deviate from the actual version of the product.
These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions.
1