GE PGP953 Instructions D'installation page 4

Installation Instructions
PREPARING THE OPENING
MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE DIMENSIONS
cutouttorear |
wall
a
L- MIN. clearance
from cutout to left ee
side wall
2-1/2" MIN from cutout to
front of countertop
30" or wider
cabinet base
L R C
PGP953 | 3-3/4" 6" 2-1/4"
PGP959 | 12" 12" 2-7/8"
CGP350} 12" 12" 2-7/8"
ALL HORIZONTAL CLEARANCES MUST BE MAINTAINED
FOR A MINIMUM OF 18" ABOVE THE COOKING SURFACE.
NOTE: Allow 7/16" ' Ap
minimum vertical
clearance from the 4
cooktop bottom (or
3-11/16" minimum depth
from the countertop) to
any combustible surfaces,
such as a cabinet drawer.
For island installation, maintain
2-1/2 in. minimum from cutout to front and bac
edge of countertop. Maintain 3 in. minimum from
cutout to side edges of countertop.
[4 | RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
1" Min. From Backwall
Recommended '
gas supply <i>
Center Line
[5] MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT (UP TO 200°F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must]
withstand heat |
up to 200°F
[2] OVERALL COOKTOP DIMENSIONS
30" él"
Cooktop
19-3/9" a 28-1/4"
[3] CUTOUT DIMENSIONS OF COUNTERTOP
To ensure accuracy, it is best to make a template
when cutting the opening in the counter.
[6] FOR AMERICANS WITH
DISABILITIES ACT (ADA) FORWARD
APPROACH INSTALLATION ONLY:
Allow 5" minimum depth a
between the countertop
and an enclosure.
|
|
NOTE: The enclosure must |
be made of wood material. !
Also, an access panel is so
required for the electrical t i
outlet, pressure regulator, |
shut-off valve, hold-down !
brackets, and service. |
j