GE PGP953 Instructions D'installation page 14

Installation Instructions
[3 | CHANGE COOKTOP BURNER
ORIFICES (CONT.)
CENTER BURNER
20,000 BTU/hr Tri-Ring Burner (PGP959 and CGP350
Models)
(Shorter) V e
Main Orifice
14
[3] CHANGE COOKTOP BURNER
ORIFICES (CONT.)
LEFT FRONT BURNER
(PGP959 and CGP350 Models)
Griddle Screw
] The griddle screw
is marked with N
for natural gas
and L for liquefied
petroleum.
Main Orifice
NOTE: The main orifice is located in the center of
the burner, while the griddle screw is located to the
right of the center of the burner.
[D] Install the LP Propane orifices and griddle
screw (on PGP959 and CGP350 models only)
in their precise locations as noted in the
earlier illustrations.
Return the natural gas orifices and griddle
screw to the bracket and attach the bracket
and the instruction sheet to the pressure
regulator using the screw removed previously.
Replace the burner heads, caps and grates.
fe]