Publicité
Les langues disponibles
Les langues disponibles
Air Dry
Select this option to dry without heat. Air drying is useful when
loads contain plastic dinnerware that may be sensitive to high
temperatures.
O
(N
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Time Saver and Quick Rinse automatically
use this
option. Air Dry is an option with all other cycles.
Lock On
Use the Lock On to prevent unintended
use of the dishwasher.
You can also use the lock feature to prevent unintended
cycle or
option changes during a cycle.
4. Press START.
NOTE: To cancel the delay, press CANCEL/DRAIN
until all Delay
Hours lights are off.
IMPORTANT:
•
Operate your dishwasher only when you are at home.
•
If your home is equipped with a water softener, do not start
the dishwasher
during the regeneration of the softener.
Follow the progress of your dishwasher with the Cycle Status
indicators.
i o(_i( ON
When LOCK ON is lit, all buttons are disabled.
NOTES:
•
The dishwasher
door can be opened while the controls are
locked.
•
You can turn on the Lock while the dishwasher
is running.
To turn on the Lock
Press and hold
(N
for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher
is locked, the light
flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
off-peak hours.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Press DELAY HOURS 1 time for a 2-hour delay, 2 times for a
4-hour delay, or 3 times for an 8-hour delay.
The number glows above Delay Hours. The dishwasher starts
the cycle in the selected number of hours.
Sensing
Your dishwasher
senses the soil level on the dishes. Soil level
determines the length of some cycles, the amount of heat added
to the wash or rinse, and the cycle needed for the load. SENSING
glows during the soil sensing parts of the cycle. Wash action
continues while sensing occurs.
Sanitized
.....
If you select the Sani Rinse option, SANITIZED glows when the
_
Sani Rinse cycle is finished. If your dishwasher
did not properly
sanitize your dishes, the light flashes at the end of the cycle. This
can happen if the cycle is interrupted. The light goes off when
you open the door.
Clean
CLEAN glows when a cycle is finished. The light turns off when
you open the door or press Cancel/Drain.
15
Publicité
