DeWalt DW1681F Guide D'utilisation page 17

shall not reduce the ECS Warranty Period. Any such part repaired
or replaced under the ECS Warranty shall be warranted for the
remainder of the ECS Warranty Period.
(3) Any warranted, emissions-related part that is scheduled for
replacement as required maintenance in the Owner's Manual
shall be warranted for the period of time prior to the first scheduled
replacement point for that part. If the part fails prior to the first
scheduled replacement, the part shall be repaired or replaced by
De.WALTaccording to Subsection (4) below. Any such emissions-
related part repaired or replaced under the ECS Warranty shall be
warranted for the remainder of the ECS Warranty Period prior to
the first scheduled replacement point for such emissions-related
part.
(4) Repair or replacement of any warranted, emissions-related part
under this ECS Warranty shall be performed at no charge to
the owner at a DEWALT Authorized Warranty Service Facility,
The warranty services or repairs must be provided at all
manufacturer distribution centers that are franchised to service the
subiect engines,
{5) When the engine is inspected by a DEWALTAuthorized Warranty
Service Facility, the owner shall not be held responsible for diag-
nostic costs if the repair is deemed warrantable.
(6) DEWALTshall be liable for damages to olher original engine com-
ponents or approved modifications proximately caused by a failure
under warranty of any emission-related part covered by the ECS
Warranty.
(7) Throughout the ECS Warranty Period, DEWALT shall maintain a
supply of warranted emission-related parts sufficient to meet the
expected demand for such emission-related parts.
(8) Any replacement part may be used in the performance of any
Warranty maintenance or repairs and will be provided without
charge to the ullimate purchaser. Such use shall not reduce
D£WAL'Fs ECS warranty obligations.
(9) Add-on or modified pads that are not exempted by the Air
Resources Board may not be used. Such use will be grounds for
disallowing a warranty claim made in accordance with this article.
DEWALT will not be liable under this article to warrant failures of
warranted parts caused by the use of such an add-on or modified
part,
EMISSION RELATED PARTS 1NCLUDETHE FOLLOWING:
1) Fuel Metedng System:
a) Gasoline carburetor assembly and its internal components.
b) Fuel filter (if equipped)
c) Carburetor gaskets
d) Fuel pump (if equipped)
2) Air induction System including:
a) Intake pipe/manifold
b) Air cleaner
3) Ignition System including:
a) Spark plug
b) Ignition module/coil
4) Miscellaneous Items Used in Above Systems
a) Vacuum, temperature, and time sensitive valves and switches.
b) Hoses, bells, connectors, and assemblies.
5) Evaporate Emissions Control
a) Fuel Hose certificated for CARB evaporative emission of 2007_
b) Fuel hose clamp
c) carbon canister (if equipped)
d) Roll over valve (if equipped)
e) Fuel tank (if equipped)
f) Fuel cap (if equipped)
6) Exhaust Emissions Control
a) catalytic converter (if equipped)
17