LaserLiner AutoCross-Laser 2 XP Mode D'emploi page 17

All manuals and user guides at all-guides.com
Slope mode
3
Do not release the transport restraint, set slide switch (3) to the mid-position
and select the lasers with the selector switch. Sloping planes and tilts can
now be measured. In this mode, the laser lines no longer align automatically.
This is signalised by the laser lines flashing.
LASER
4
Optional: Working with the
laser receiver RX / GRX
Use an RX / GRX laser receiver (optional) to
carry out levelling at great distances or when
the laser lines are no longer visible.
XP version: To work with a laser receiver,
switch the line laser into hand receiver mode
with the Hand receiver mode button (5).
The laser lines will now pulsate with high
frequency, making the laser lines darker.
The laser receiver RX / GRX can detect
these pulsating laser lines.
XPG version: Manual receiver mode is
switched on automatically.
!
Follow the operating instructions of the corresponding laser receiver.
!
Manual receiver mode is available only for the laser lines.
14
GB
LASER LASER
Hand receiver mode
LASER LASER LASER