LaserLiner AutoCross-Laser 2 XP Mode D'emploi page 12

All manuals and user guides at all-guides.com
Read the operating instructions and the enclosed brochure „Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
Cross-line and 5-point laser for vertical and horizontal alignment
– The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
– The 5 laser points are arranged each offset by 90° on the horizontal
and vertical planes of the laser lines. 3 points of intersection, consisting
of a laser line and point, are formed at the end of the laser lines.
General safety instructions
– The device must only be used in accordance with its intended purpose and
within the scope of the specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices
are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
10
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 510/635 nm
EN 60825-1:2014