Bosch GTR55-85 Consignes D'utilisation/De Sécurité page 14

Fig. 5
11
9
Always check that all the connection elements are secured
with the Safety Hooks 8 and clamping levers 9 and are firmly
attached.
Attaching the Vacuum Hose
(Fig. 1)
Attach the Vacuum Hose 5 to the Vacuum Outlet 6 on the
Handle Section 7.
Connect the Vacuum Hose 5 to a vacuum (sold separately).
The vacuum must be suitable for the material being sanded.
When working on vertical surfaces, hold the drywall sander
with the Vacuum Hose 5 facing downwards.
Assembly
7
8
Installing/Removing the Hose/Cable Clip
(Fig. 6)
Place the Hose/Cable Clip 23 over the Vacuum Hose 5 .
Insert the power cable into the cable groove of the Hose/
Cable Clip 23 .
To remove the Hose/Cable Clip 23, pull it off the Vacuum Hose
5 and remove the power cable from the Hose/Cable Clip 23.
Fig. 6
-14-
8
9
22
23
5