Sony Alpha HVL-F56AM Mode D'emploi page 48

5
Press the select button to blink "TIMES."
• The current number of flashes for multiple flash is displayed on the
data panel.
6
Press the + or – button to select the number of flashes.
• The number of flashes may be selected from the following.
- -, 40, 35, 30, 25, 20, 15, 10, 9, 8, 7, 6, 5, 4, 3, 2
• Keep the + or – button pressed down to repeatedly change the
value.
• When "--" is selected, flashes continue at the set frequency while the
shutter is open.
7
Press the select button to blink "LEVEL" on the data
panel.
• The current power level is displayed.
48