Publicité
STEP 3
Pre-drill (2) 3/32" holes at
an angle through the top
and bottom edge of the
filler towards the adjacent
mounting cabinet (See Fig. 3.1
and Fig. 3.2).
3
32
STEP 4
Clamp filler to cabinet, once
level attach using (4) screws
through pre-drilled holes.
Note: Align front of fillers
with back of face frame (See
Fig. 4.1 and Fig. 4.2).
#2
INSTALLATION INSTRUCTIONS: 432 SERIES FILLER PULLOUT
All manuals and user guides at all-guides.com
FIGURE 3.1
FIGURE 4.1
Top of Filler
Pre-Drill Holes
FIGURE 3.2
Pre-Drill Holes
FIGURE 4.2
Bottom of Filler
3
Publicité
