Publicité
Les langues disponibles
Les langues disponibles
3. Touch
for 3 seconds.
4. Touch
a few times until
5. Touch
of the Timer to select an automatic mode.
To operate the hood directly on the hood panel deactivate the automatic mode
of the function.
When you finish cooking and deactivate the hob, the hood fan may still operate
for a certain period of time. After that time the system deactivates the fan
automatically and prevents you from accidental activation of the fan for the next
30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do that touch
This deactivates automatic operation of the function and allows you to change the fan
speed manually. When you press
intensive level and press
fan. To start the fan again with fan speed 1 touch
To activate automatic operation of the function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light automatically whenever you activate the hob. To
do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2 minutes after deactivating the hob.
Hints and tips
WARNING! Refer to Safety chapters.
Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in
the cookware very quickly.
Use the induction cooking zones with suitable cookware.
• The bottom of the cookware must be as thick and flat as possible.
• Ensure pan bases are clean and dry before placing on the hob surface.
• In order to avoid scratches, do not slide or rub the pot across the ceramic glass.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:
comes on.
you raise the fan speed by one. When you reach an
again you will set fan speed to 0 which deactivates the hood
when the hob is active.
.
17
Publicité
