Publicité
Les langues disponibles
Les langues disponibles
Cleaning
Clean the casing of the product with a soft, clean cloth. If it is very dirty, you can clean it with
a slightly damp cloth. Do not use abrasive or harsh cleaning agents. Never use a wet cloth to
clean the product.
Remove the water tank and clean the inside with clean water. If you clean it with an abrasive
sponge or brush, it may cause scratches. Never remove the floater inside the collection tray.
Clean the outside with a cloth. Put the water tank properly back in place after cleaning.
STORAGE
Store the product in a dry, clean place. Do not store the product in extremely high or low
temperatures.
If the product is not going to be used for a long time:
1.
Unplug and secure the plug at the back of the product.
2. Empty the collection container and make sure it is clean and dry.
3. Clean the air filter.
4. Make sure the product is stored upright and avoid direct sunlight.
TROUBLESHOOTING
Problem
Cause
The plug is not plugged in.
The water tank is full.
The water tank is not inserted
The product is not
correctly.
working.
The air vents are blocked.
The product is defrosting.
30
Solution
Make sure the plug is plugged in
correctly.
Make sure the water tank is empty.
Make sure the water tank is correctly
positioned in the product.
Make sure there is enough space
around the product. Make sure the
air vents are not blocked.
This is normal. See "Instructions for
use > Notes".
The filter is dirty.
The air vents are blocked.
The product is not in
dehumidify mode.
The product does
not dehumidify
The temperature in the room
properly.
is too low.
The humidity in the room is
too low.
The room is too large.
The product makes
The product is not installed
noise during
correctly.
operation.
The product
The temperature in the room
suddenly stops
is higher than 35°C.
dehumidifying.
The clothing is not in the
airflow of the product.
Clothing is not
drying properly.
The temperature in the room
is too low.
There is a bad smell
coming from the
The room is not clean.
product during use.
There is water/
moisture in the
The product has been tested.
container before I
have used it.
The product gives a
The water tank is full or
sound signal.
removed.
English
Clean and maintain the air filter as
described under "Maintenance and
cleaning".
Provide adequate space around the
product. Make sure the air vents are
not blocked.
Touch the mode button repeatedly
so that the dehumidify mode is
selected.
This is normal. The product stops
when the temperature is below 5°C.
This is normal. The product stops
when the humidity is below 60% and
is in automatic mode.
Make sure all windows and doors are
closed and that the room does not
exceed the capacity of the product.
See "Product features > Technical
Data".
Always make sure the product is
installed on a flat, stable and level
surface.
This is normal. The product will
restart once the temperature has
dropped.
Make sure the product's airflow is
directed toward the clothes you
want to dry.
Drying clothes in a cold room
is more difficult. Make sure the
temperature rises or be patient.
The product extracts air from the
room, walls and stuff around the
product. The smell is caused by this.
Because the product is pre-tested
in production, there may be water/
moisture in the collection container
before you have used it.
Please refer to "Instructions for use >
Sound signal".
31
Publicité
