Publicité
Les langues disponibles
Les langues disponibles
Timer setting
You can use the timer function in 2 different ways. When the time expires, the timer light
indicates the remaining time.
Turning off automatically
1.
Turn on the product by touching the power button.
2. Make sure the timer function has not been set before. If "Hr" is visible on the display, the
timer function has already been set.
3. Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will automatically turn off.
Delayed start time
1.
Make sure the product is turned off.
2. Make sure the timer function has not been set before. If 'Hr' is visible on the display, the
timer function has already been set.
3. Touch (repeatedly) the timer button to set the desired time. After the hours shown on the
display, the product will turn on automatically.
Touch the timer button to deactivate the timer function.
Indicator lights
At the top, 3 LED lights shine at the bottom of the control panel to indicate the humidity of the
room.
·
Red: >70%
·
Green: 50 to 70%
·
Blue: >30 to 50%
Drain hose
In general, the water is collected in the water tank. If you want continuous water drainage, you
need to follow the following steps to get the situation as shown in figure F.
1.
Unplug the power cord.
2. Insert the drain hose into the drain hose opening. Always
make sure the hose runs down and is not blocked or
kinked.
3. Make sure the hose is in a container or something similar
to allow the water to drain.
28
Notes
·
Both the dehumidification and air cleaning functions stop during defrosting.
·
Do not unplug or turn off the unit during defrosting.
·
The product is designed to remove unpleasant humidity in everyday life and to be used
for additional drying of washed clothes indoors. This product is not suitable for keeping the
humidity very low (±50% or less).
·
This product does not have a cooling function. It produces heat during use and the
temperature in the room increases by 1 to 4°C. The temperature increases if the product is
used in a cabinet or similar. In addition, the temperature in the room increases when doors
and windows are closed and heat is produced by other appliances in the room and solar
radiation.
·
Please note that it may take ±3 minutes before the dehumidification program will start.
·
The efficiency of the product is affected by the air. Preferably keep windows and doors
closed in the room where the product is placed.
·
For safety reasons, the product will automatically shut down when the temperature
reaches ±36°C in the room where the product is placed.
·
Due to circulation of the coolant, the product may make noise when starting up. When the
circulation is stable, the noise will decrease.
MAINTENANCE AND CLEANING
Maintenance
If the air filter is dirty or clogged, it can affect the operation of the product. We recommend
servicing and/or replacing the filter every 6 months.
1.
Remove the air grille on the back of the product.
2. Carefully remove the air filter and holder.
3. Clean the filter with a vacuum cleaner to make it dust-free.
4. If the filter is very dirty, you can wash it with water and a mild detergent.
Do not use abrasive or harsh detergents.
5. Rinse the filter well and let it dry.
F
English
Air filter holder
Air filter
29
Publicité
