Publicité
Les langues disponibles
Les langues disponibles
Recommended modes
Situation
Description
To dehumidify a room or
protect a ceiling and/or
walls from moisture build-up
and mold.
To dehumidify a (clothing)
closet.
To dry washed clothes
faster.
To dry a carpet or rug.
To dehumidify a small room
or dry shoes.
The built-in microcomputer remembers the position once it is set. The product repeats the
same setting by touching the power button. If the connection is disconnected by unplugging or
if the power goes out, you have to start setting again.
26
Mode
Continuous dehumidification.
Continuous dehumidification.
Drying mode for clothing.
Clothes drying mode.
Clothes drying mode.
Emptying the water tank
When the water tank is full, the product will not work. You have to take out the water tank, empty
it and put it back before the product will work again.
1. Hold the water tank with two hands. Gently pull out the water tank as shown in figure D.
2. Hold the water tank by the handle and gently empty the water tank as shown in figure E.
3. Put the water tank back in place. The product will automatically resume operation.
Sound signal
·
When the water tank is full, the product will stop working and emit a sound signal. The
sound signal will be audible for 20 seconds after you remove the water tank from the
product.
·
A sound signal will be emitted each time a button is touched.
How to use
1.
Make sure the water tank is empty and properly placed.
2. Plug in the power cord.
3. Touch the power button to turn the product on.
4. Select the desired mode by touching the stand button (repeatedly).
5. Touch the power button to turn the product off.
D
English
E
27
Publicité
