Publicité
Les langues disponibles
Les langues disponibles
Replacing the fuse
Only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Dimensions (LxWxH):
Max. tearing load:
Max. pressing load:
Weight (net):
Fuse:
Accessory:
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-256/64 controller 16bit
FUTURELIGHT CP-512/64 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT UDB 1 USB Update Box
FUTURELIGHT APAD-1 for PRH-360
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 17.04.2007 ©
230 V AC, 50 Hz ~
45 W
4
3-pin XLR
425 x 365 x 160 mm
15 kg
10 kg
9 kg
F 1 A, 250 V
No. 51834265
No. 51834288
No. 51834295
No. 51860102
No. 51860110
No. 51836901
No. 51837611
No. 51834001
41/79
00024219.DOC, Version 1.2
Publicité
