➎ Switching The Displayed Image; Switching The Input Source; Remote Control - Elmo Huddle Space HS-G1 Guide De Démarrage Rapide

➎ SWITCHING THE DISPLAYED IMAGE

■SWITCHING THE INPUT SOURCE

The HDMI equipment to input can be selected by the following methods:
※Make sure that the Output mode selection switch is set correctly.
＜Switching with the Channel buttons on the Operating panel＞
Select the desired port by pressing the Channel button（①～⑧）on the Operating panel.
The video of the HDMI device connected to the selected port appears.
＜Switching with the remote control＞
Select the desired port by pressing the Channel button（①～⑧）on the remote control.
The video of the HDMI device connected to the selected port appears.

■REMOTE CONTROL

The input source can also be switched from the remote control.
【Caution】
● About Recording
There is the condition that cannot record it.
In that case, LED of the REC button is flashing.
Please refer to the instruction manual for more information.
Button Name
Channel
①～⑧
buttons
REC button
Capture
button
MIC MUTE
button
29
Function
To select the HDMI input for CH.
To start/stop recording.
（The recorded video file will be
saved in the SD card）
To capture still images.
（The captured image will be
saved in the SD card.）
To mute the microphone during
recording.
日
本
語