Ezviz C6C Guide De Démarrage Rapide page 7

All manuals and user guides at all-guides.com
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below.
Power Interface
Turn on the camera and let it power up. The camera will completely rotate side-to-side
and tilt up-and-down once.
Power Cable
LED Indicator Status
Solid Red: Camera is starting up.
Slowly Flashing Red: Wi-Fi connection has failed.
Fastly Flashing Red: Device exception (e.g.
MicroSD card error).
Solid Blue: Video is being viewed or played back
in EZVIZ App.
Flastly Flashing Blue: Camera is ready for the Wi-
Fi connection
Slowly Flashing Blue: Camera is running properly.
1
Power Outlet