Cisco Systems Linksys WPC54GS Guide D'installation Rapide page 3

Wireless-G devices, select G-Only
Mode. Click Next.
E
Select your type of security: 64-bit
WEP , 128-bit WEP , or WPA-PSK. All
devices in a network must use the
same type.
WEP
The Passphrase is used to gener-
ate one or more WEP keys. It is
case-sensitive and should not be
longer than 16 alphanumeric
characters.
If you are using 64-bit WEP encryp-
tion, then the key must be exactly
10 hexadecimal characters. If you
are using 128-bit WEP encryption,
then the key must be exactly 26
hexadecimal characters.
Select the TX key and Authentica-
tion method of your network.
WPA-PSK
Select TKIP or AES encryption.
Then, choose a passphrase
between 8-63 characters.
F
The Setup Wizard will ask you to
review your settings before it starts
to install files. Click Next if you are
satisfied with your settings, or click
Back to change any settings.
G
After the software has been suc-
cessfully installed, click Exit.
All manuals and user guides at all-guides.com
E
1
E
2
F
G
3