Publicité
Les langues disponibles
Les langues disponibles
If the light does not still work, verify if the light bulb is
correctly screwed. If in spite of these tests, there is no light,
it is necessary to change the light bulb. Use a 220-240V~,
MAX 10W light bulb.
1. Disconnect the appliance;
2. Open the light cover (1);
3. Undo the defective light bulb anticlockwise.
4. Screw the new light bulb clockwise.
DOOR REVERSE
Users can change the direction of opening according to
one's own needs. The concrete operating sequence is as
follows:
1. Screw off the bolt which in right
hinge cover with cross opener, take
off the right hinge cover, screw off
the upper and lower hinge bolts.
-54-
Publicité
