DeWalt DWE7485 Traduction De La Notice D'instructions Originale page 45

Consult your dealer for further information on the
appropriate accessories.
Replace blade guard when worn. Contact your local D
service centre for details on a blade guard replacment.
saW BLaDEs: ALWAYS USE 210 mm noise reduced saw blades
with 30 mm arbour holes. Blade speed rating must be at least
6000 RPM. Never use a smaller diameter blade. It will not be
guarded properly.
BLADE DESCRIPTIONS
application #
General purpose DT20432-QZ
Fine crosscuts DT20433-QZ
Protecting the Environment
Separate collection. Products marked with this symbol
must not be disposed of with normal household waste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at www.2helpU.com.
WALT
e
Diameter Teeth
210 x 30 mm 24
210 x 30 mm 40
EnGLIsh
43