Parkside PBH 1500 D4 Traduction Du Mode D'emploi Original page 37

ROTARY HAMMER PBH 1500 D4
GB
Introduction
IE
NI
Congratulations on the purchase
of your new appliance. You have
selected a high-quality product. The
operating instructions are part of this
product. They contain important information
about safety, use and disposal.
Before using the product, familiarise yourself
with all operating and safety instructions.
Use this product only as described and only
for the specified areas of application. Please
also pass these operating instructions on to
any future owner(s).
Proper use
The PBH 1500 D4 rotary hammer (hereinafter
appliance) is suitable for:
• Hammer-drilling into brickwork, concrete
and stone
• Chiselling into concrete, stone and plaster
• Drilling into stone, wood and metal
Any other usage of or modification to the
appliance is deemed to be improper usage
and carries the risk of serious personal
injury.
The manufacturer accepts no responsibility
for damage(s) arising out of usage contrary
to the instructions specified below.
The appliance is not meant for commercial
use.
Depicted components
Function selector
Function selector release switch
On/off switch
Rotational speed preselector adjusting
wheel
RED indicator light
4a
GREEN indicator light
4b
Additional handle
Tool holder with dust protector cap
Locking collar
Locking button for depth stop
Depth stop
Wheel-rim chuck
Chuck key
34
All manuals and user guides at all-guides.com
Package contents
1 rotary hammer PBH 1500 D4
1 additional handle
3 drill bits (see fig. C)
1 flat chisel (see fig. C)
1 pointed chisel (see fig. C)
1 depth stop
1 wheel-rim chuck (see fig. B)
1 chuck key (see fig. B)
1 carrying case
1 operating manual
Technical details
Nominal power
consumption:
Rated voltage:
Idle speed:
Hammer frequency:
Drilling capacity:
Protection class:
Noise and vibration data:
Noise measurement determined in
accableance with EN 60745. The A-rated
noise level of the tool is typically:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
1500 W
230 - 240 V~ 50 Hz
n 0–800 min ¯
0
0–4000 min ¯
max. 13 mm for steel
max. 40 mm for wood
max. 32 mm for concrete
II/
95.6 dB(A)
3 dB
106.6 dB(A)
3 dB
PBH 1500 D4