AERMEC Variable Multi Flow VMF-E18X Manuel D'utilisation Et D'installation page 23

Power supply
Max input power (excluding loads controlled by TRIACs)
Digital inputs
Analogue inputs
Analogue outlets
Digital outputs
Assembly
Protection rating
Storage conditions
Operating conditions
Software class
Power supply
Accessory command outputs (Valves, Plasmacluster,
germicidal lamp, etc.)
EC digital input
MS digital input
SP digital input
Analogue inputs (SA-SW)
Analogue input (SC)
TTL local serial
RS485 supervision serial
Output power supply 12V DC
Reference 0-10V for Inverter
Outputs 01-10V
Inverter fault input
E18 TECHNICAL CHARACTERISTICS
230V AC +/-10%, 50-60 Hz
4.5VA
4 free contacts
3 for reading NTC 10K probes
2 (0-10V) for Inverter reference and valve control
2, 230V AC with Triac
On the machine
IP20 (referring to the containment plastic)
-20T80°C, humidity 80% non-condensing
0T50°C, humidity 80% non-condensing
Class A
SPECIAL CONNECTIONS FOR E18
Screw terminals, 5mm pitch
Cable section - min=0.5mm
Screw terminals, 5mm pitch
Cable section - min=0.5mm
Maximum cable length = 30m
Screw terminals, 3.81mm pitch
Cable section - min=0.2mm
Maximum cable length = 100m
Sliding contact
Maximum cable length = 3m
Screw terminals, 3.81mm pitch
Cable section - min=0.2mm
Maximum cable length = 100m
Quick plug-in connections
Maximum cable length = 3m
Quick plug-in connection
Maximum cable length = 30m
Screw terminals, 3.81mm pitch
Cable section - min=0.2mm
Maximum cable length = 30m
Screw terminals, 3.81mm pitch
Cable section - min=0.2mm
Maximum cable length = 1000m
Screw terminals, 3.81mm pitch
Cable section - min=0.2mm
Maximum cable length = 30m
2-pole screw terminal, 3.81mm pitch
2-pole screw terminal, 3.81mm pitch
2-pole screw terminal, 3.81mm pitch
2 max=2.0mm
max=1.3mm
2
max=1.0mm
2
max=1.0mm
2
max=1.0mm
2
max=1.0mm
2
max=1.0mm
2
AVMFE18LJ1710 - 6795748_02
2
2
2
2
2
2
2
23