AERMEC Variable Multi Flow VMF-E18X Manuel D'utilisation Et D'installation page 18

Water probe fitted
Water side changeover
Pre-heating delay
With Valve
Minimum and maximum
controls active
Dynamic correction A:
Without valve
Water probe (Heating) fitted
Delay for pre-heating
Minimum temperature check
activated (Heating)
Maximum check activated if
With Valve
probe is present (Cooling)
Dynamic correction A:
Fixed correction in Cooling, in
absence of Cooling probe
Without valve
18
AVMFE18LJ1701 - 6795748_02
Adjusting a 2-pipe system
Upstream water probe
Water probe not fitted
Air side changeover
Pre-heating delay
No minimum and maximum
control
Fixed correction
Configuration not used
Adjusting a 4-pipe system
Upstream water probe (Heating)
Water probe (Heating) not fitted
Delay for pre-heating
Minimum temperature check
deactivated (Heating)
Maximum check activated if
probe is present (Cooling)
/
Fixed correction
Configuration not used
143
Downstream water probe
Water probe fitted
Air side changeover
No ventilation delay
Minimum and maximum
controls active
Dynamic correction B:
Water side changeover
No ventilation delay
Minimum and maximum
controls active
Dynamic correction B:
Downstream water probe (Heating)
Water probe (Heating) fitted Water probe (Heating) not fitted
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Dynamic correction B:
/
Fixed correction in Cooling, in
absence of Cooling probe
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Dynamic correction B:
/
Fixed correction in Cooling, in
absence of Cooling probe
90
Water probe not fitted
Air side changeover
Pre-heating delay
No minimum and maximum
control
Fixed correction
Air side changeover
No ventilation delay
No minimum and maximum
control
Fixed correction
Delay for pre-heating
Minimum temperature check
deactivated (Heating)
Maximum check activated if
probe is present (Cooling)
Fixed correction
No ventilation delay
Minimum temperature check
activated (Heating)
Maximum check activated if
probe is present (Cooling)
Fixed correction